中文  |  English

Product

Contact

Telephone:0574-62721336

Fax:0574-62729932

Zip code:315400

Mobile phone:13805800494

Website: en.yyzhenda.com

E-mail:yyzhenda@hotmail.com

Address:No. 1, hongyun 2nd road, lianghui development zone, yuyao


How to modify the edge cutting die to improve stability

Your current location : Home >> News >> Common problems

How to modify the edge cutting die to improve stability

2019-09-16
times

切边模具如何修改才能提高稳定性

The copper ring brooch mould includes upper and lower mould, upper mould plate, upper inner mould plate, concave and convex mould, bolt, tool handle and cutting rod, concave and convex mould core is set in the concave and convex mould, the concave and convex mould is provided with the upper material plate, the lower end of the bolt is fixed on the upper stripping plate, and the spring is covered on the bolt.The spring is located between the concave and convex type and the upper discharge plate;The lower form includes the lower die plate, the lower cover plate, the female form and the lower strip plate, which are installed on the deep compression punch, the scraper punch and the ejector rod. The lower end of the scraper punch is positioned in the lower cover plate, and the upper end of the ejector rod is in contact with the lower perforated plate.The lower end of the push rod contacts the elastic member.This copper ring deep, improve production efficiency and product quality stability.Shaving die contains mutually chimeric type on board and the lower mold plate, next to the corner of the symmetrical type Settings box guide rod, the next set medium plate, between plate and plate on the plate and the upper plate between the fixing, set between the medium plate and the lower mold plate products and plate and plate products through drill set on medium plate products clamp connection column and fixed on the fixed connection, between products and plate and metal plate under the plate after set products, in the outer edge of the clamp set products are connected to the medium plate scraper knives this product a cut of die-casting products at the same time can also remove die-cast flow and slag bags, Bali, etc.,Cut off the flow path, dross bag, Bali, etc. on the casting products in order to prevent the deformation of the casting products and ensure the cutting quality of the products without manual operation.In addition, improve the efficiency of trimming of die - casting parts.

label

Recent visits:

Related products

Related news

logo.png


Address:No. 1, hongyun 2nd road, lianghui development zone, yuyao

Fax:0574-62729932

All rights reserved:Yuyao Zhenda Precision Machinery Co., LTD

Technical support:huaqi


Quick links

>Home    >About

>Product >Case

>News     >Contact

二维码