中文  |  English

Product

Contact

Telephone:0574-62721336

Fax:0574-62729932

Zip code:315400

Mobile phone:13805800494

Website: en.yyzhenda.com

E-mail:yyzhenda@hotmail.com

Address:No. 1, hongyun 2nd road, lianghui development zone, yuyao


Thread rolling plate

Your current location : Home >> Products >> Thread rolling plate

Thread rolling plate

Product attributes

  • Classification:Thread rolling plate
  • Product no. :1569661832
  • Number of visits:0
  • Date of issue:2019-10-17
  • Product overview
  • performance characteristics
  • Technical parameters

搓丝板


Install the wireboard in the moving mold groove and the fixed mold groove. No thin pad or iron sheet is required under the mold.It is necessary to adjust the gap between the two screws and tighten them.Adjust the gap between the two plates to make the blank just tight. If the gap is too large, the blank of the outer hexagonal die will not fall off due to rubbing.If the clearance is too small, the blank will not be able to enter the gap between the two plates. Similarly, the blank will not be able to be rubbed and dropped.At the same time, the clearance of the upper and lower end faces of the two twisted wires is adjusted by rotating the two fastening bolts and the tension bolts.If the tightening bolt is tightened a little, the gap of the flat plate die at the end of the hexagon die becomes smaller, the gap should be adjusted to the depth of the screw thread until it meets the requirements.

The friction surface between the slide guide and the body guide will wear and tear when the thread is long running.At this time, the upper and lower screw plate will appear uneven surface, make the screw produced inclined line (that is, screws or bolts can not be screwed into the nut), will produce waste thread such as self-tapping screw at this time, need to grind or scraping machine, make the bottom surface and fixed mold groove restore in the same plane.Temporarily, can put a few thin pad or iron piece to be in appropriately move rub silk board, make two rub silk board are in same plane, but this will make adjust complex, and can make product quality unstable.For this reason, in severe wear, a good method is to carry out grinding or scraping machine.


label

Prev:Thread rolling plate2019-10-17
Next:Thread rolling plate2019-10-17

Recent visits:

Related products

Related news

logo.png


Address:No. 1, hongyun 2nd road, lianghui development zone, yuyao

Fax:0574-62729932

All rights reserved:Yuyao Zhenda Precision Machinery Co., LTD

Technical support:huaqi


Quick links

>Home    >About

>Product >Case

>News     >Contact

二维码