- Classification:Blanking die
- Product no. :1569662273
- Number of visits:0
- Date of issue:2019-10-17
- Product overview
- performance characteristics
- Technical parameters
1. Vibration box:
1) ultrasonic inspection: when steel mold is not installed, ammeter should not cross (0.4a);
2) press the style of check switch: press 2 seconds to stop for 1 second within 3 seconds, do not press for more than 3 seconds to avoid shortening the life of the transducer and burning the electronic components;
3) prevent dust and metal of shenyang nut punching rod from falling into the vibration box to avoid short-circuit and damage of circuit board;
4) connected atmosphere unimpeded, excellent heat dissipation.
1) the host machine should not be placed under high temperature, wet and dusty conditions;
2) do not arrange liquid on the host, connect neatly, do not clean with liquid when wiping;
3) if it is beyond 7 days or less used, please use the dust cover for the linhai nut punch rod;
4) if the engine is not used for a long time, it shall be used on time once a week;
5) pay attention to clean air pressure air source, such as retention of 1/2 water, should be secreted in real time;
6) in addition to the need for maintenance, as far as possible to stop open the machine, open the power must be removed, and release the residual power in the capacitor.
3. The steel:
1) it is easy to change the vibration frequency when the steel mold is knocked or damaged.
2) steel mold to avoid oxidation and rust, do not need to wipe with oil cloth after sealing.
3) the bottom rib should be cleaned when steel mold is installed.
4) ultrasonic steel mold is specially designed and matched with a firm frequency. Do not cut, drill or change any surface, otherwise it will affect the life of the transducer and vibration box.
5) when loading and unloading the steel mold, you must handle it with care to prevent the ridged thread of the steel mold of the luffing rod...