Blanking die
Product attributes
- Classification:Blanking die
- Product no. :1569662241
- Number of visits:0
- Date of issue:2019-10-17
- Product overview
- performance characteristics
- Technical parameters
It is necessary to confirm whether 1 waste is located outside the mold or off the bed.3. Inclination Angle of the waste slide plate in the mold: chute ≥25mm, truck ≥156.4. If the waste plate of hebei nut punching rod is required to slide out from the bed table, it should be the secondary waste.Removable (high speed 3) over 7 days or less, 6 wastes must be safely disposed of within 1 week without sharp corners, and enough space must be removed from the mold at design time without sharp angles.Install slide plate, shenzhen nut punch rod do not arrange liquid, clean, do not wipe dry.Clean with liquid;3) cover with dust cover over 7 days or less;4) in case of non-durable utilization, 6 wastes must be disposed safely within one week without sharp corners, and sufficient space must be ensured to be taken out from the mold during design.Over 30, diagonal size larger than 30×80 irregular beans, do not use waste, please use slider pull out.The capacity of 8 waste boxes please consider one shift