-
Edm grinding (also known as edm generative machining) is a significant development of edm technology, which is a new technology to replace the traditional pro...
Release time:2019-10-10
-
Equipment control staff shortage, only a few pieces of equipment in the other show the loss of operators, so that the equipment can not be explained.Mold users...
Release time:2019-09-16
-
Flange blanking die, hit a stamping die, die, die handle on everything, and the mold base, the mold base on the profile Settings are trimming punch and mold bas...
Release time:2019-09-16
-
The spray coating method is a kind of three - anti - paint coating method.Stored in the upper tank of the three anti - paint, precision rub wire plate through t...
Release time:2019-09-16
-
Spraying method is the most frequently used coating method in the industry, and is divided into mechanical active spraying and manual spraying.In this, mechanic...
Release time:2019-09-16
-
Dip coating of anti - paint operation processDip coating has been widely used since the early stage of coating technology, and it is used in places that need co...
Release time:2019-09-16
-
Brush coating is the simplest method of coating.Typically, a laboratory environment or batch prototyping/manufacturing can be used to perform local repairs and ...
Release time:2019-09-16
-
Three anti - paint from the chemical components can be divided into acrylate, silicone, polyurethane three anti - paint;From the curing system, solvent - base...
Release time:2019-09-16
-
There are many links to be guaranteed for the successful application of internal heat mould.Is one of the most important three technical factors. 1 application ...
Release time:2019-09-16
-
In - mold hot system compositionAlthough there are many in-mold manufacturers and a variety of in-mold eager product series, but a model in-mold eager system is...
Release time:2019-09-16
-
Error and fallacy of tani's eager workmanshipAlthough compared with the traditional mold, the mold has many obvious advantages, but mold users also need to ...
Release time:2019-09-16
-
In the mold hot mold in today's world industry countries and regions are very common use.This is primarily due to the following obvious characteristics of t...
Release time:2019-09-16
-
As an advanced injection molding technology, it has been improved in western European countries.Many foreign plastic mold manufacturers produced more than 50 pe...
Release time:2019-09-16
-
1. The bed material is made of high trademark and high strength cast iron, which has been treated with de-stress tempering and natural aging to ensure small def...
Release time:2019-09-12
-
The mould of copper ring broaching machine includes upper mould and lower mould. The upper mould includes upper template, upper backing plate, concave and conve...
Release time:2019-09-12
-
1) ESI (EarlierSupplierEvolvement supplier early to participate in) : this phase is mainly about between the customers and suppliers, such as product design and...
Release time:2019-09-12
